1 / 18
Winding Machine V2 - Multifunctional 3D Printed Coil Winder — image 1
1 / 18

Winding Machine V2 - Multifunctional 3D Printed Coil Winder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

DIY three-axis coil winder with touchscreen, turns/length control and hardware kit. Requires 3D printing and assembly.

Rating
0 / 5
Likes
19
Downloads
44
Makes
0
Views
450
Reviews
0

Updated at source:

Model information

Category
Tools
License
Standard Digital File License

Winding Machine V2 is a DIY project. You must print and assemble the structural parts yourself; these printed parts are not included in the hardware kit.

Filament rewinding from one spool to another

Winding Machine V2 rewinding 3D printing filament


Touchscreen controls and winding presets

Winding Machine V2 touchscreen controls and presets


Wire-break detection stops winding when a break is detected

Wire-break detection on Winding Machine V2


Power-loss recovery: restore the winding state, then resume manually

Winding state recovery after a power interruption


Real-time tangle detection during the winding process.

Real-time tangle detection during winding


Fine fishing-line winding demonstration. This is a specific example, not a general capability guarantee for every material.

Fine transparent fishing-line winding demonstration


Foldable arms: approximately 16 x 19 cm storage footprint

Folding the spool arms for compact storage


Eight selectable touchscreen interface languages

Touchscreen menu with eight interface languages



Small-spool wire winding on Winding Machine V2


Build your own three-axis coil winder and wire winding machine with 3D-printed parts and a dedicated hardware kit. Set the wire diameter, spool width, winding speed and rotation direction, then wind by turns or by length.

This is a DIY project, not an assembled machine. The hardware kit does not include the 3D-printed structural parts. You need a 3D printer and must print and assemble the parts yourself.


You can wind by turns or by length, with optional automatic stop when a wire break is detected.
The 4.3-inch touchscreen combined with physical buttons makes operation both intuitive and reliable.

The core system now uses an encoder motor drive, offering higher precision, greater torque, and faster response.

Actual winding results depend on the wire material, spool and operating conditions. For unusual spools, heavier loads or harder wire, contact [email protected] before purchasing.

Built-in Wi-Fi allows remote firmware updates, and up to five preset winding configurations can be saved for quick recall.


The modular 3D-printed frame supports full arm folding, and when folded, the size is only about 16 × 19 cm — roughly the same as a spool of 3D printing filament.

Printing: use a printer with a 256 x 256 x 256 mm build volume. The full version 2.0.3 3MF is the preferred starting point in Bambu Studio and includes the seven-plate layout and per-part settings.

The project uses a 0.4 mm nozzle, 0.2 mm layer height and PETG/PLA profiles. Retain the per-part wall, infill and support settings rather than applying one setting to all parts. Reference printing time: about 34 hours; your slicing result may differ. The STL package has 41 files, not 41 parts that must each be printed once.

• Structure: 3-axis control (main rotation, X-axis guide, Z-axis telescopic motion)

• Wire diameter range: 0.03 – 2 mm

• Spool width range: 5 – 80 mm

• Winding speed: 30 – 176 rpm

• Telescopic stroke: 0 – 40 mm

• Encoder motor: Precision feedback for accurate turns and layer alignment

• Control modes: Manual /by turns/by length/auto-stop on break/real-time tangle detection

Power-loss recovery: restores the previous winding state and remains paused until manually resumed.

• Screen: 4.3" touchscreen + physical buttons

• Preset memory: 5 configurations

• Language support: 8 languages

• Connectivity: Wi-Fi firmware upgrade supported

• Device size: 16 × 19 cm (folded)

• Design: Modular 3D-printed parts, foldable arms

The hardware kit supplies the touchscreen, control board, two encoder motors, one stepper motor, power adapter, five limit switches, lead screw, wiring, screws and other assembly hardware. Printed structural parts are not included. Follow the assembly video and complete calibration before use.

Full kit available here:  Winding Machine V2 Hardware Kit 


Hardware kit components; 3D-printed parts are not included


https://shop.wondermaker.vip/products/winding-machine-v2?utm_source=printables&utm_campaign=winding_machine_v2

Version notes: 2.0.1 added eight interface languages, real-time tangle detection, tapered spool cores and X-axis improvements. 2.0.2 added power-loss state recovery with manual resume, gradual speed ramp-up and X-axis improvements. Print-file package: 2.0.3; the current assembly video retains its V2.02 title. Free model downloads do not include firmware source code or permission to sell printed copies commercially.

Product demonstration

Operating guide

Assembly guide (V2.02). The following video covers the separate touchscreen TF-card firmware update.


Latest Winding Machine Display Firmware :

https://github.com/shanhujiao1985/WindingMachine/raw/main/WindingMachineV2/Display/WindingMachineV2.01.tft 

Tags