Simple Wedge Trim Hangers for Light Objects
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.11 – €0.14 net (excluding VAT)
For file: Simple Wedge Hangers_0.4n_0.15mm_PLA_MINIIS_9m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.12 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 9 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hang up things like fairy lights, wire lights, other wires, or other light objects in a robust and landlord-friendly way
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple Wedge Trim Hangers - Non-Destructive Trim Mounts
These wedge hangers offer a clean, non-destructive way to mount lightweight objects along ceiling trim, moldings, and similar edges - ideal for rentals or temporary setups.
They install by wedging between the wall and ceiling trim. Simply push them upward with reasonable force and friction holds them securely in place, with no screws, nails, or adhesives required.
Features
Non-destructive, landlord-friendly mounting
Installs and removes by hand
Held in place entirely by friction
Rear mounting hole: Ø 3.5 mm
Suitable for wire lights, fairy lights, cords, hooks, or small decorations
Can also be used under cabinets, shelves, door frames, or similar trim gaps
Included Variants
Flat wall version - for smooth walls
25x6x5.5mm
Panel wall version - for walls with 2 mm chamfered panel grooves
25x6x5.5mm - bottom groove dimensions are 25x2x2mm
Print Info (Tested)
Material: PLA
Layer height: 0.15 mm
Nozzle: 0.4 mm
Perimeters: 2
Infill: ~15% (type not critical)
Printed using PrusaSlicer’s .15mm STRUCTURAL preset.
Print the wedges on their side. No supports or brim neccesary.
Notes
Designed for lightweight items only
Grip strength depends on trim shape and surface finish
Not suitable for high-heat environments
A simple, fast-printing solution for clean and reversible mounting.