1 / 3
Deep Groove Single Row Ball Bearing 6x26x10 — image 1
1 / 3

Deep Groove Single Row Ball Bearing 6x26x10

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A single row deep groove ball bearing made with 6mm BB steel balls.

Rating
0 / 5
Likes
2
Downloads
11
Makes
0
Views
84
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I made a 5 reel filament dry box equipped to spool filament directly into my printer. Instead of purchasing commercial ball bearings, I designed a bearing with a 10mm width to allow for reels with differing widths. Each reel rests on 4 bearings allowing for smooth spooling to take place. Bearing dimensions are -

6mm ID
26mm OD without the flange
10mm Width
35mm flange width
1.5mm flange thickness

I used 6mm steel zinc plated BB balls and printed the outer holding ring as well as a female and male inner ring allowing for the bearing to be assembled with ease. There are no special print setting and I used standard default setting for my Creality K1 printer with a 0.4mm nozzle. I used PLA filament but any alternate material is likely to work depending on your application. The outer ring is available with or without a flange.

To assemble the bearing, place the male inner ring inside the outer ring and drop 8 balls into the gap between the two rings. Once the balls are in position, place the female inner ring on top of the male inner ring and use a M6 x 30 bolt and nut to squeeze the two parts together thus encapulating the balls. No glue is required.

Anyone wanting more information on my filament dry box can contact me for more details.

Tags