Self-Draining Sponge Holder | Wave Drip Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minimalist drip tray for sponges or soap. Features wave ridges for airflow and a drainage spout. Available in 2 sizes.
- Rating
- 4.854 / 5
- Likes
- 1,665
- Downloads
- 9,943
- Makes
- 45
- Views
- 25,535
- Reviews
- 41
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
🚨 UPDATE: Check out the improved V2 here:
BOM: Printed with ROSA3D High Speed PLA Gray
Say goodbye to soggy, smelly sponges. This drip tray features a functional wave pattern on the bottom that lifts your sponge (or soap bar) slightly up, allowing air to circulate underneath and water to flow away freely.
Key Design Feature: The front of the holder has a dedicated drainage spout/opening. Position this edge over your sink, and excess water will naturally drain out, keeping your countertop dry and your sponge hygienic.
The Set Includes 2 Sizes:
Standard (95x65mm): Perfect for standard kitchen sponges. Fits items up to ~95x65mm comfortably.
Large (115x85mm): Great for larger scouring pads or big bars of artisanal soap. Fits items up to ~115x85mm.
Printing Instructions:
Material: PETG or ASA are recommended because they handle moisture and cleaning chemicals better than PLA (though PLA works fine for a while).
Supports: None required.
Infill: 15-20%.
Watertight: Ensure your "Flow" is calibrated or increase wall count to 3 to ensure the tray doesn't leak.