1 / 4
Label Mount for HPE Disk Drive Tray
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount to use standard 12mm labels on HPE disk trays
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Insertable label holder for HPE 2.5'' SAS SATA Drive Caddy for use with standard 12mm labels.
As the original labels are too small and awkwardly shaped, they would be difficult to replace consistently.
The goal was to hold a label of a standard size and make it replaceable, all without limiting the airflow.
Make
Types
Option | Description |
|---|---|
10-16 | 10mm wide base, 16mm wide label holder |
16-24 | 16mm wide base, 24mm wide label holder; covers a full width of the cut-out |
Option | Setting | Note |
|---|---|---|
Supports | None | |
Infill | 15% | |
Material | PETG | PLA is fine |
Perimeters | 2 | |
Layer height | .15mm | .20mm works too |