1 / 13
Shed case - the ugliest case you can imagine for hoverboard motor direct drive steering wheel (FFBeast, OpenFFBoard) — image 1
1 / 13

Shed case - the ugliest case you can imagine for hoverboard motor direct drive steering wheel (FFBeast, OpenFFBoard)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D printed case for hoverboard motor direct drive steering wheel (oDrive, OpenFFBoard, SK16 and series 20 alu profiles)

Rating
5 / 5
Likes
42
Downloads
217
Makes
0
Views
2,005
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

If you appreciate my work and like it, you can buy me a coffee ;) but this is absolutely not expected.

Short introduction:

This design is created for 6,5" hoverboard motor with magnetic encoder. At the beginning wheelbase was build around FFBeast firmware which is using only oDrive Mini however during develompment fixation points for alternative OpenFFBoard firmware was implemented so if you want to you can use both solutions. Wheelbase has available slots for 2 USB-C sockets and XT60 socket on the back plate and RJ9 socket on the front plate. Power supply is not a part of wheelbase however please read carefully this chapter because wrong choice can fundamentally change FFB feeling.

Design explanation:

This design using 2060 and 2020 profiles and SK16 support bracket as a main structure assembly. Hoverboard motor is fixed by two SK16.

Electric parts (oDrive, OpenFFBoard, USB headers, XT60 header, RJ9 header) are fixed to the main 2060 profile by the 3D printed structure and to the bottom part. Braking resistor is fixed directly to the main 2060 profile. RJ9 socket is fixed between bottom part and front plate.

Design includes optional features like: cooling channel (designed for the 60x60x25 fan and LM2596 buck converter, inlet shape is covering more or less half of the back plate surface leaving second half for air outlet) and holder for 12-way wago (I was using this to connect additional lines for encoder debugging).

If you want to use cooling channel, back plate of the motor must have drilled venting holes.

Fixation methods:

You can mount wheel base to the simrig, table etc. directly with the screws and T-nuts to the bottom 2020 profile (distance between bottom profiles is 78,4 mm which fits Moza or Simagic screw patterns) or with the M5 screws by the two brackets screwed to the 2060 profile on the sides. Third method is using two extended brackets screwed to the 2060 profile on the sides with table clamps.

If you want to use side brackets you have to tap holes for the M5 screws in the 2060 profile.

Motor requirements:

This case is designed for the 6,5" hoverboard motor. Hoverboard motors can have different magnets – from 15mm to 30mm length, the longer magnets, the more powerful motor. It is not possible to distinguish between motors based on their external appearance but you can predict magnets length based on their weight. The weight of the motor with 30mm magnets (including tire) is 2.9kg or more. 30mm motor is highly recommended becauses even if you dont want to use max torque bigger motor with lower torque will heat less than smaller.

Motor must be modified to fix magnetic encoder on it. I would recommend MT6835 magnetic encoder (16384 PPR -> 65536 CPR) as a cheapest and robust solution (price difference with MT6701 is neglible but CPR downgrade is significant). Project with assembly video for required magnetic encoder holder is available here.

Power supply (THE MOST IMPORTANT PART!):

Power supply is one of the most important thing for the FFB experience. Knowing how hoverboard motor performs depending on voltage and current, we can select the right power supply. Wrong PSU selection cause significant negative FFB feeling and makes the wheel perform like garbage.

I created calculator with theoretical explanation so please go through it to select correct PSU.

https://tig33r.github.io/FFB-Wheel-PSU-Calculator/

Dont get cheapest, random PSU from aliexpress because firstly the quality is unknown and secondly sounds like big vacuum cleaner.

Get weel-known brand like mean well or server PSU like hp common slot.

Assembly video:

BOM:

Main assembly:

  • oDrive Mini - 1 pc (avoid ODESC - no pullup capacitors and problematic encoder lines capacitors to remove)

  • OpenFFBoard - 1 pc if you want to use OpenFFBoard firmware

  • Braking resistor 2 Ohm 50W - 1 pc (but should be in the oDrive bundle)

  • RJ9 header - 1pc

  • XT60E header - 1 pc

  • USB-C header - 2 pcs

  • USB-C connector - 1pc

  • 6,5" hoverboard motor (30mm magnets) with magnetic encoder (MT6835) - 1 pc

  • PSU 36V 13A (480W) - 1pc (Voltage and Power depends on your motor and speed/torque requirements)

  • SK16 - 2pcs

  • aluminum profile 2060 x 200 mm - 1 pc

  • aluminum profile 2020 x 80 mm - 2pcs

  • 2020 bracket - 4 pcs

  • M5x8 ISO7380-1 - 8 pcs

  • M5x18 ISO7380-1 - 4 pcs

  • M5x8 ISO7380-2 - 10 pcs

  • M5x10 ISO7380-2 - 1 pc

  • M5x12 ISO7380-2 - 1 pc

  • M3x6 DIN912 - 27 pcs (depends on how many cable guides you want to use)

  • M3x8 DIN912 - 13 pcs

  • M3x10 DIN912 - 4 pcs

  • M5 2020 T-nut - 24 pcs

  • M3 2020 T-nut - 2 pcs

If you want to use side attachment brackets:

  • M5x12 ISO7380-2 - 4 pcs

If you want to use cooling channel:

  • 60x60x25 fan

  • LM2596 buck converter

  • M4x8 ISO7380 - 4 pcs

  • M2.5x6 DIN912 - 2 pcs

3D print recomendations:

Material: PETG, ASA, ABS - Avoid PLA for parts close to the motor, as heat may cause deformation.

Slicing settings: 5 perimeters for 0.4mm nozzle with 0.2mm layer height, bot and top 5 layers (1mm thickness), 25% grid infill recommended.

Prefered parts orientation for print:

Tags