Kärcher K2 pressure washer soap pipe clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An attachment to keep the Kärcher K2 pressure washer soap pipe out of the way when it is not in use
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 17
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The soap pipe kept getting in the way whilst rolling the pressure washer around, so I decided to make this simple clip that holds it out of the way. It uses the original mounting points for Kärcher accessories, so you don't need to modify the pressure washer at all.
Material: PETG
Layer height: 0.2mm
Walls: 5
Infill: 15% Gyroid
Supports: Tree supports
I used tree supports because normal supports were incredibly hard to remove from the intricate part.
You will need a self-tapping screw for plastic, similar to the ones that come with the pressure washer, they are 21mm long, but I found that ones as short as 15mm still work.
The part is best printed like this:
