1 / 7
NODEMCU IDEASPARK ESP8266MOD v3.2 WITH ONBOARD .96 INCH OLED CASE — image 1
1 / 7

NODEMCU IDEASPARK ESP8266MOD v3.2 WITH ONBOARD .96 INCH OLED CASE

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A CASE FOR AN IDEASPARK ESP8266 WITH OLED.

Rating
0 / 5
Likes
6
Downloads
84
Makes
1
Views
424
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a case with a couple different options for a NodeMCU ESP8266MOD v3.2 by ideaspark with onboard .96 inch OLED display. 

For the small/thin version you will need M2.5x25mm bolts, washers and nuts. This version consists of the BASE, SPACER, and FACEPLATE.

For the thicker version with battery/storage, you will need M2.5x45mm bolts, washers and nuts.  The thick/battery storage  version consists of the BATTERY STORAGE, BATTERY BASE, SPACER and FACEPLATE. 

There are small orientation bumps on one corner of all the pieces for easier layout.  The spacer has a notch out of one of the tabs inside to clear the JST plug.  The BATTERY BASE plate has a hole in it and a small cutout to help with your battery cable management.  The regular BASE plate has a small notch in one of the pillars to give more clearance for the JST plug as well.  

Tags