AgOpenGPS AIO Standard v4.5 Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This project includes a cheaper option for connection/enclosure the pcb of the AgOpenGPS AIO Standard v4.5
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 31
- Makes
- 0
- Views
- 347
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Instead of the expensive Deutsch plug, I opted for an inexpensive Aliexpress plug that can be screwed together and also establishes a secure connection.
Printed out of PETG/PETG-CF
Used Components:
2x9pin Terminal block connector (https://de.aliexpress.com/item/1005008350198388.html)
2xM4x30mm Screws
2xM4 hex nuts (must be inserted while printing with pause)
4xM3x10mm (for connector)
4xM3 hex nuts (for connector)
The UM982 I used: (~95€ https://de.aliexpress.com/item/1005009880145217.html)
This design is not 100% waterproof/dustproof, as it has openings for Ethernet and antennas.
If you have any further questions, just write a comment!