1 / 5
WandererCover V4 mount / adapter for Omegon RC 6" OTA — image 1
1 / 5

WandererCover V4 mount / adapter for Omegon RC 6" OTA

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapter bracket that lets you mount a WandererCover V4 on an Omegon Carbon Pro RC 6" OTA

Rating
0 / 5
Likes
1
Downloads
6
Makes
0
Views
82
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

What this is

I designed this 3D model to mount a WandererCover V4-EC flat panel/cover on an Omegon Carbon Pro RC 6" OTA.


Why it exists (the mounting problem)

The main issue is the chamfer on the metal ring/clamp at the end of the telescope. The mounting rail also gets in the way, so a straightforward “flat bracket” approach doesn’t fit properly.


How it mounts to the telescope (OTA)

The adapter uses the existing screw hole on the side of the telescope.
Replace that side screw with a longer one M4x12mm or longer, so you don’t end up holding the whole assembly on only a few thread turns (and risk stripping the threads).


Latest revision: optional zip-tie retention

In the latest revision I added a dedicated horizontal slot for an optional original zip-tie (the one supplied with the device), so the plastic part has two mounting/retention points. You can see it as a white strip on photos.

The setup has already spent many nights in use and everything worked fine, but I decided the zip-tie is an extra safeguard:

  • it helps protect both the OTA and the device in case of an accidental collision (e.g. strong wind or incorrect meridian flip limits),

  • and it stiffens the assembly if you frequently open/close the flap.

Use if you prefer to sleep peacefully during the fuly automated imaging nights.


Suggested print settings

  • Material: PETG / ASA (PLA may be OK in mild conditions, but PETG/ASA is generally safer for functional outdoor parts); I strongly suggest ASA.

  • Layer height: 0.20 mm

  • Perimeters/Walls: 5+

  • Infill: 30–99% (increase if you want extra stiffness)

  • I suggest printing on the biggest flat surface, so it doesn't crack.


Bill of materials (Hardware)

  • 4× M3x10..M3x16 screws (length 10mm up to 16mm will work)

  • 4× M3 square nuts

  • 1x M4x12 screw for OTA side screw

  • Optional: plastic washers (nylon / polyamide) for the M3 screws

  • OTA side screw: reuse the existing one, but recommended to replace with a longer screw to avoid relying on only a few thread turns

  • Optional: the original supplied zip-tie


Assembly steps

  1. Insert 4× M3 square nuts into the rectangular slots in the adapter. Feel free to use a dab of CA glue once side holes and nuts holes are aligned

  2. Use the OTA’s side screw to mount the adapter to the telescope.

    • Strongly consider a longer screw for safer thread engagement, but also make sure it doesn't stick inside too much and obstruct your optical train.

  3. Position the WandererCover and fasten it using 4× M3 screws into the square nuts.

    • Use nylon/polyamide washers if you want to protect the paint.

    • Position your OTA, so the gravity pulls the square nuts deeper into the sockets - makes life so much easier during assembly

  4. (Optional) Add the original supplied zip-tie as a secondary retention point for extra safety and stiffness.

Tags