1 / 1
Onewheel XR Half Fender
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Half Fender for the Onewheel XR (Same Model for Front & Rear).
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v3.0
My goal for this fender was to maximize foot space, while also avoiding any bumps.
Material: PETG
(but others like ASA, ABS, or maybe even TPU 72D should work - though I have not tested them)
Nozzle: 0.8mm (0.4mm would also work - but set walls to 8)
Walls & Top / Bottom Layers: 4
Infill: 20%
Takes ~90 grams of filament per side
Both sides (Front & Rear) are the same file.
Also, If the fender rubs the tire slightly, you can fix it by adding a washer under each screw of the fender, and that should resolve it.