Pokemon & YuGiOh! Card Holder - Power Rangers SPD Containment Card
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Pokémon and Yu-Gi-Oh! card holder, inspired by the Power Rangers S.P.D. containment card.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 75
- Makes
- 1
- Views
- 591
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Pokemon & YuGiOh! Card Holder - Power Rangers SPD Containment Card
A display and storage card holder inspired by the Power Rangers S.P.D. containment card, sized to fit Pokémon and Yu-Gi-Oh cards.
It’s designed for sleeved cards. Inner card cutout measures 92 × 67mm.
The front features embossed text, with the SPD logo on the back. Images are 3D renders of the model.
Hardware Required
8 × 4×2mm magnets required.
I don’t recommend using magnets larger than 5mm.
If you need support for alternate magnet sizes, let me know and I’ll try to accommodate.
Printing Settings
Prints in two parts
No supports
Due to the small text, a 0.2mm nozzle is recommended
A 0.4mm nozzle may work, but I had mixed results. The SPD came out fine, the "containment card" text was legible but anything else it struggled with
For colour accuracy, you can add a pause and swap filament:
Front: pause just before the 1mm layer (grey → black recommended)
Back plate: pause at 3.40mm layer and swap filament
All my Power Ranger Models and Ranger Keys on cults3d can be found here.
They can also be found here on MW.
Logo was adapted from TheNextDecade