Search results: spd

Shimano Cleat SPD SL alignment tool

Aligment tool for SPD SL cleats. Category: Sport & Outdoors

SPD pedal adapter

Allows to use normal shoes with automatic bicycle pedals type SPD. Required material: printed part x1. Using PLA as a printing material, the strength of the product is enough to fulfill its function.

SPD-SL compatible road cycling cleat

SPD-SL road cycling cleat for cycling shoes. Modeled after the yellow cleats (which allow 6 degrees of free rotation). I have printed one and checked that it fits a matching pedal, but nothing more. I plan to use these for indoor cycling…

SPD Bicycle Cleat Adjust Tool

Design is intended to allow more repeatable accurate adjustments of SPD (MTB) shoe cleats. Not necessary but embossed text looks better if you do a colour change at 0.8mm Z height and a change back at about 1.4mm {Note the slicer photo…

SPD Cleat Cover for Shimano compatible cleats

SPD cleat cover protects the spd cleat and protects the floor you are walking on. It fits all Shimano compatible two-bolt spd cleats (sh-51, sh-56, etc) Walking is much more comfortable with them. The cleat does not crackle on the…

SPD-SL Cleat Cycling Shoe Wall Mount

Mount on the wall with counter-sunk 3 or 4 mm then insert the shoe like a pedal. Features three 5 mm x 3 mm magnet recesses, that stick to the cleat bolts to provide extra bonding. It will actually hold the shoe quite well without these.

Shimano SPD Pedal Plate

I used hijomojo's fittment and made my own grip design

Yet another SPD Pedal Plate

It's a remix of @h19x51 SPD Pedal Plate, with some enhancements for problems that I found in my case. I liked the original for the really simple, easy-to-print, and robust design. But it was somewhat hard to remove, a tad too small, and…

Shimano SPD Cleat Tool

For aligning the SPD cleats on the shoe. The single version can be used individually, the pair version for both shoes at the same time in order to better adjust the symmetry. For the pair version, the buttom part must be printed twice. I…

Matek ASPD-4525 Pitot Tube

Reference CAD files for Fusion 360 for design of mounts, etc. Measured from part Fusion 360 f3d file included

SPDGR / SCRPR / FDGR - Ergonomic bed scraper / 3D Printing Tools

The Ergonomic SPDGR (that you didn't know you needed) Scrape, spudge and fudge things with ease and safe in the knowledge you (probably) won't scratch your print surface (check the Shore hardness of your print surface first, but you're…

Bike SPD pedal adaptor

Allows to use normal shoes with automatic bicycle pedals type SPD.

Cleat Pedals - Clip into Shimano Road Bike Pedals - Remixed for Shimano SPD-SL PD-R550 and 105 PD-R7000

This is a remix of https://www.thingiverse.com/thing:3669328 . I've gotten permission from the original creator to post this remix. I've made a simple edit to the STLs to remove the raised edges from the bottom to allow compatibility with…

Dekaranger / Power Rangers SPD Badge

Badge from Dekaranger / Power Rangers SPD If you are interested in more tokusatsu themed 3d print files like Henshin belts, check out my etsy, patreon and website! Feel free to message me with model suggestions here or over on my website.…

Shimano Mountain SPD Cleat Wedges

2021 06 06: I added a rev 2 folder for the Inventor file & STLs. The improved version better supports the cleat in the rear. I use Shimano SM-SH56 cleats. Since changing out my cleat wedges to these 3 degree versions (rev 1), it certainly…

SPD Cleat Cycling Shoe Wall Mount

Like my SPD-SL mount but for SPD. The hold isn't quite as secure as the SPD-SL variant so at least two of the 5 mm x 3 mm magnets are suggested to increasing the holding force.

Power Rangers SPD Delta Blasters

Print Settings Wall loops: 2 Layer Height: 0.2mm Infill: 3% Sparse infill pattern: Grid I used Gyroid infill on the car_hood parts to help with the area around the trigger Support: Tree Brim Type: Mouse ear I use an Outer Brim on the…

SM-SH45 SPD-SL CLEAT COVERS / COUVRE-CALES SPD-SL SM-SH45

- Use TPU filament - Shimano Cleat Covers are easy to use and can help you protect your cleats and improve your grip - To install them, simply slip them over your cleats and make sure they fit snugly - You can remove them by pulling them…

SPD-SL Cleat Pedalplatform

This is a Pedalplatform to clip into SPD-SL Pedals to be printed in TPU. Print this in TPU with 0 Top and Bottom Layers with 40% infill and 4 perimiters. with supports Category: Sport & Outdoors

Shimano SPD Cleat alignment tool

Hello, i have greated a alignment tool for Shimano SPD Cleats. Its created in two different sections, you can print it also on small print plates. If you have some improvments for this feel free to contact me.

Roland SPD One Floor Mount Guitar

Made this at my Dads request. Keeps the SPD in with just friction. Have added the fusion f3d file incase you want to your liking

SPD(-SL) cleat wallmount

Remix of the mount by @mathias720. I added an ever so slight cup to the top of the mount, and chamfered the outer corners, so it also fits SPD-SL cleats. I also chamfered the bottom instead of using a fillet, to prevent > 45 degree…

11spd Bike Cassette Holder

Plug to hold the cassette together along with the lockring. Can be used front either end. This model is designed for Sram/Shimano/Sunrace 11spd. Will work with 10spd but may be loose.

Shimano SPD Platform Pedal Adapter

Are you wanting to ride around the neighborhood or to the park with the kids, but don't want to wear your dedicated riding shoes? Enter this platform pedal adapter. It installs on top of existing SPD pedals, converting them into platform…

SPD cleat shim 1.5mm

Shimano SPD shim

Road Bike pedal wall mount SPD

Hi all, Made wall mount for my road bike. It is split into two different models. If mount snap (don't think so), there is a replacement top part to be printed instead of the whole model. It is reinforced in crucial places with M4 bolts.…

SPD Bicycle Cleat Adjust Plate

Used this to adjust 3 new pair of shoes - worked quite good for me

SPD MOUNTAIN BIKE SHOE HOLDER

HANG SHOES WITH MOUNTAIN BIKE SPD CLEATS NEATLY. MOUNTING HOLES ARE FOR #8 FLAT HEAD SCREWS

SPDT switch case SS12D00G3

A small case for small SPDT switch SS12D00G3. No supports required, integrated sacrificial layer and built in clip.

Shimano SPD Cleat Protector

Here is a Shimano SPD Cleat Protector, that i made originally for MTB Rockrider ST 500 shoes. Printed with FLEX TPU plastic on 0.25mm draft settings

Shimano SPD-SL Road Pedal to Flat Pedal Adapter

'Flatz' is a 3D-printable snap-in flat pedal adapter designed for Shimano SPD-SL road pedals, allowing riders to use regular footwear without carrying an extra pair of cycling shoes. The adapter clips directly into the pedal using the…

Shimano SPD-SL angled cleat shim

Disclaimer I am not a doctor or medical professional or even an athletic trainer all claims below are based on my own research & experience Problem cycling athletes may have naturally inverted or everted ankle joints when under no load,…

Bicycle Clipless Pedal Cleat Alignment Tool, SPD or Crank Brothers

A simple tool to aid in aligning pedal cleats when fitting them to shoes. Works with Shimano SPD or Crank Brothers style cleats.

Mini Momentary Toggle Switch SPDT

MTS-123-MZ https://smile.amazon.com/Twidec-Momentary-Miniature-Waterproof-MTS-123-MZ/dp/B07VHCB1Q4/ref=sr_1_3?crid=3UAGCPQQF5HEH&keywords=mini+toggle+switch+momentary&qid=1658423797&sprefix=mini+toggle+switch+momentary%2Caps%2C80&sr=8-3

CNC Case for MKS DLC32 v2.x + GRBL_SPD for Makita Routers and a Buck Converter

A simple CNC Case for MKS DLC32 v2.x + TS24R LCD + GRBL_SPD and Buck Converter. The cool air is pulled from the right hand side vents ensuring temps stay nice and low. Update : Version 2 uses M3 bolts to hold the lid on and has space for…

SPDT Relay Case / Enclosure for 5V/12V Relays

This is a 3D-printable enclosure designed for SPDT 5V or 12V relays. The design includes two parts: a base and a cover.

SPD-SL cleat shoe wall mount (no magnets)

Modification of the model by tuna-fish that doesn't include magnets, and has three screw holes

LaskaKit ESPD-35 box

Krabicka pro LaskaKit ESPD-35 ESP32 3.5 TFT ILI9488 Touch Predni dil, zadni dil a zapinaci tlacitko Pro prichyceni displaye ke prednimu dilu pouzijte srouby M2

SPD Cleat magnetic wall mount doubled

Used this magnets (Affilate Link): https://amzn.to/4cYkhim Used this screws (Affiliate Link): https://amzn.to/4cVPL9r

Pokemon & YuGiOh! Card Holder - Power Rangers SPD Containment Card

Pokemon & YuGiOh! Card Holder - Power Rangers SPD Containment Card A display and storage card holder inspired by the Power Rangers S.P.D. containment card, sized to fit Pokémon and Yu-Gi-Oh cards. It’s designed for sleeved cards. Inner…

CNC Case with XLR Sockets for MKS DLC32 v2.x + GRBL_SPD for Makita Routers and a Buck Converter

A more advanced CNC Case with XLR Sockets for MKS DLC32 v2.x + TS24R LCD + GRBL_SPD and Buck Converter. The cool air is pulled from the right hand side vents ensuring temps stay nice and low. GRBL_SPD for Makita Routers available HERE .…

CDU, SPD, AFD, Grüne, FDP Untersetzer 110mm - coaster 110mm

CDU, SPD, AFD, Grüne, FDP Untersetzer 110mm - CDU, SPD, AFD, Greens, FDP coaster 110mm 0.2mm layer, 2 walls, 15% infill PETG Used

CNC Case with GX Sockets for MKS DLC32 v2.x + GRBL_SPD for Makita Routers and a Buck Converter

A more advanced CNC Case with aircraft style GX16 and GX12 Sockets for MKS DLC32 v2.x + TS24R LCD + GRBL_SPD and Buck Converter. The cool air is pulled from the right hand side vents ensuring temps stay nice and low. GRBL_SPD for Makita…

SPD Adapter Plate for MKS US-S Pedals

I recently bought the great MKS US-S pedals . This is the double-sided SPD model. Originally I wanted the SOLUTION model, which has only one SPD side, to mount on my Gravel. But unfortunately, the version with the ‘EZY’ quick release…

Spd Benchy - Annex Voron Mtn Dew - Stash Can / Threaded Container - Multi Color Print

Joke made by a buddy who asked me to make it so I did. Don't get mad at me all I didn't know the rivalry till after made. Do a m600 or similar color change after the base that should be silver. If you open the project instead of import it…

Spikes SPD MTB SHIMANO

Spikes SPD Screw: M5 8-10MM Print: infill 100% 0.12 layer Material ABS, NYLON

Power Rangers SPD - Megazord Toy - Sword Replacement

Power Rangers S.P.D. - Delta Sword - Megazord Toy Sword Replacement (2 Versions) A replacement sword for the Power Rangers SPD Delta Squad Megazord toy. Designed to match the original. Perfect if your old one is missing or broken. There…

SPD cleat shim

SPD cleat shim 1.5mm. To be installed between cleat and shoe interface. You may need longer screws.

SPDT Rocker Switch Support Faceplate

This is a support plate/faceplate that you can snap a SPDT rocker switch on to, and then screw the plate into a Neutrik layout screwhole. I used this for an arcade stick spdt switch (tourney lockout, socd switching etc). This was modeled…

OnStep Shield for ESPDUINO-32 [WeMos (D1 or D2) R32]

OnStep Shiled for ESPDUINO-32 [WeMos (D1 or D2) R32] telescope goto controller on basen Howard Dutton project My wiring diagram and PCB on EasyEDA Pinmaps for my PCB is included (replace in OnStep\src\pinmaps\Pins.MaxESP3.h) This Shiled…

Switch guard for standard SPDT/DPDT lever switches (made it for my Yamaha THR10)

Print and mount. Presto.

SPD pedal adapter with no wobble

Enhanced SPD adapter with a very strong fit to the pedal and no wobbling, improved grip.

SPD pedal plate

I had tried a SPD pedal plate that broke after a few uses, so I designed this simpler and thicker version. Install by first loosening the clamping force all the way, then click it into place and tighten it again. It can turn both ways, so…

Power Rangers SPD - Delta Squad Megazord - Toy Gun Replacement

This is a 1:1 replica of the original Space Patrol Delta Squad Megazord Blaster for the Bandai toy. I modeled it to match the original exactly, so it even fits into the green zord (runner) for storage like the original. The gun is…

SPD-SL Cycling Cleat Wedges, 1 degree and 2 degree versions

Simple cleat wedges. I recommend printing with 100% infill. I've ridden 100 miles or so on an indoor bike with these to reduce nerve pain / compression. I haven't tested these on real outdoor road cycling but they're holding up well on my…

EspDeck

This is a part of the EspDeck project, the casing for the ESP8266 Device and keys. https://github.com/AeroSteveO/EspDeck Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Infill: 40% Filament:…

SDRPlay RSPdx mount

Fixture for mounting SDRPlay's RSPdx with Multiboard or Underware organization systems.

Seeed Grove 4-Channel SPDT Relay Case

Yep it comes with a case (I was surprised, didn't read the small print!) but I wanted a more secure one with cable retainers so here it is. If you are using these for a high voltage application please ensure that you have the correct…

APEM 5000 series SPDT switch

Model of a APEM 5000 series SPDT switch. There are many clones out there that are very similar in size and mounting diameter. You can use this model in your frontpanel or switch box designs to check dimensions and component interaction…

Shift Knob (includes 5-spd, blank, and pontiac variants)

Requires 6 M3 screws and nuts, and a bolt that matches your cars threads. 50mm knob, I found the common 40mm knobs too small for my hands. I've included a pontiac logo version, and a 5 speed shift pattern version, and the step so you can…

SPD Cleat Nut

This is the geometry for the cleat nut which fits inside SPD shoes. It is not strong enough when printed in plastic but the geometry might be useful

Power Rangers SPD Helmet Stand

Hope someone can find use for this as well.

SPD-SL Road Shoe Hanger

Was tired of having my road shoes on the ground and wanted a way to get them out of the way. This hanger fits in my SteadyRack that I have inside but can be hung on anything. The clips fit SPD-SL (Shimano) road cleats. Print: -2x…

The FSPD (Fabric Softener Pouring Device)

Wife wanted to be able to fill her new washing machine's container for fabric softener through a very small opening. Without spilling. Not saying she has motoric difficulties, but Happy Wife, Happy Life. Blend file for 2.8 And yes... She…

Accurate Shimano SPD Cleat Blank

I couldn't find an accurate SPD cleat blank for making a fixture I needed so I made one. I printed a jig with this where I made the opening 0.125mm bigger and it slides on perfectly but doesn't move. This won't work with the Silca…

Bracket Wheel On The Wall Behind The SPD Pedal

Created for Gravel Bike Shimano SPD 520 Pedals Tires 42-622 (28x1.60-700x40C) Print Settings Rafts: No Supports: No Category: Sport & Outdoors

SPD Mountain Bike Shoe Hanger

Holes fit #8 countersunk screw or 1/8" toggle bolt.

SPD-SL adapter for exercise bike

Adapter for using Garmin Vector 3 power sensor with a non-smart exercise bike. You can buy online a relatively cheap "90% new" Vector 3 pedal and make your exercise bike smart enough to ride in Zwift. Design based on…

SPD Pedal Platform

This is a Pedalplatform to clip into SPD Pedals to be printed in TPU. Print this in TPU with 0 Top and Bottom Layers with 40% infill and 4 perimiters. without Supports Category: Sport & Outdoors

SPDT Pony Switchstand -- N Scale

SPDT Switch Turnout Throw with Working Target (Fully Analog)! - nScale.net The author has left finishing this as an exercise for the reader. Details on its operation are on nscale net. The tolerancing is off, but the idea should work.…

Box for ESPDomofon with cover

Box for ESPDomofon with cover

SPD Cleat Filler

My cycling shoes support both “2-hole” SPD cleats, and “3-hole” Delta cleats, but when using Delta cleats the 2-hole plate slid back and forth whilst cycling, making an annoying rattle/clacking sound on every peddle stroke. My cheap shoes…

Look Keo bike cleats for shoes with recessed SPD mounts

Title says it all. Any stiff material will work. PLA set have lasted for years. Though it may not seem like it, it is best to print on its side. Minimizes various distortions and maximizes relevant strength (length wise and screw hole)

LaskaKit ESPD-3.5" ESP32-S3 3.5" TFT ILI9488 CAP Touch Rev. 3.2 + Krabička

3D model LaskaKit ESPD-3.5" ESP32-S3 3.5" TFT ILI9488 CAP Touch Rev. 3.2 + Krabička Vývojový kit: https://www.laskakit.cz/laskakit-espd-35-esp32-3-5-tft-ili9488-touch/?variantId=12158 Krabička:…

Inclined Salamander Positioning Device (ISPD) or AxoLounge

The Inclined Salamander Positioning Device (ISPD) is a 3-D printed device designed to assist with the collection of sperm from axolotls and has potential uses for other salamander species. This device could also be applied to veterinary…

Bike Shoe SPD-SL Cleat Wall Mounting

Liked the original model concept of Tuna-fish (thankyou) but wasn't happy with the way the shoe stuck out at the heel. How the shoe sits in the holder is also dependant on the cleat position you use (for me my cleats are rearward maxed…

SPD Bike Pedal Adapter

Universal SPD bike pedal adapter - same model works for right & left side. To be used with the SPD metal cleats, this gives a more durable design and allows you to better secure the pedal in the pedal. Example of the metal SPD cleats:…

Montážní podložka pro Arduino Uno nebo ESPduino

Vymodelováno ve FreeCADu. 4 vruty 2x10

Stinger SPD5201 Mount

When I was installing my Stinger SPD5201 I noticed that the two screws are too far apart from each other to screw into the lid of my airbox. I made this to put on top of the lid. Fuse holder screws into the fuse block using the outer…

Wall mount Shimano SPD SL

Wall mount Shimano SPD SL with 3,5mm Spax holes to screw also possible to us M4 Screws printed in PETG

Wandhalterung für Radschuhe mit SPD Platten/ Wall mount for cycling shoes with SPD cleats

Mit dieser Halterung könnt ihr eure Radschuhe an die Wand hängen. Ich habe darauf geachtet, dass sich die Schuhe einfach einhängen lassen. Die Halterung wird mit 2 Senkkopfschrauben mit einem Durchmesser von 3 mm befestigt. Ich selbst…

Sparkfun Mini Power Switch Wearable Enclosure - SPDT 30V/200mA

Sew-able enclosure for https://www.sparkfun.com/products/102 . Used as a main power switch. The switch itself is embedded below the surface of the enclosure by a small amount, so the switch is difficult to slide without a tool of some…

Seeed 4-channel SPDT relay hat mount

English For a Voron Switchwire, I wanted to be able to switch the power supply for the control board, i.e. the actual printer, and additional devices such as lighting and exhaust air filters independently of each other via the Raspberry…

Bike Shimano SPD platform pedal conversion

Shimano SPD platform pedal conversion is a parametric adapter that mounts onto Shimano SPD cleats, converting them to flat pedals. The adapter uses the existing 2-bolt SPD cleat holes (spaced ~14mm center-to-center) as anchor points;…

Shimano TL-PD33 - Alternative Service Tool Solution for PD-M324 & PD-M505 SPD Clipless Pedals

Important Disclaimer: This is NOT INTENDED TO PERMANENTLY REPLACE A PROPER METAL TOOL, however, it works under reasonable loads and is dramatically cheaper to print when compared to purchasing the suppliers specialty tool. Your mileage…

SPD3303X-E Power Button

Simple button replacement for Siglent Power Supply model SPD3303X-E. Print settings: PETG 50% infill Print sideways with supports for a stronger button and a better finish for the front view

SPD Bierdeckel Untersetzer - SPD beer mat coaster

Shimano SPD-SL cleat holders with IKEA compatible screw holes

Remixed the model https://www.thingiverse.com/thing:4969976 to fit my IKEA Albert

Pet Deluxe Chicken Coop door gear (SPD-01139)

well the door gear broke ... so here is a replacement one that seems to work

SPD klíčenka

je to klíčenka politické strany SPD je malá takže vám nebude vůbec vadit na klíčích

ZOHD Dart 250g Pitot Tube ASPD-4525 Halterung

Zur Befestigung am Deckel werden M2-Gewindeeinsätze und M2-Schrauben benötigt

Grove SPDT Relay 30A (SLA-05VDC-SL-C) Mount for Voron Switchwire

Description Custom mount for the Seeed Studio Grove SPDT Relay 30A (SLA-05VDC-SL-C) , designed specifically for the Voron Switchwire / Ender 3 V2 conversion. I designed this mount to provide a clean and secure way to install the Grove 30A…

Skadis Shimano SPD shoe hook

The hook has to be printed horizontaly with support (tree)

Wandhalterung für Radschuhe mit SPD Platten/ Wall mount for cycling shoes with SPD cleats

Mit dieser Halterung könnt ihr eure Radschuhe an die Wand hängen. Ich habe darauf geachtet, dass sich die Schuhe einfach einhängen lassen. Die Halterung wird mit 2 Senkkopfschrauben mit einem Durchmesser von 3 mm befestigt. Ich selbst…

SPD Mountain Bike Shoe Hanger

Holes fit #8 countersunk screw or 1/8" toggle bolt.

Pedal with SPD Clip Mount

Pedal mount that allows the use of the SM-SH56 or SM-SH51 cleats to be screwed to the bottom of them, using the standard cleat bolts and 8x8x2.6mm nuts. This is a modification of Jumawa's shimano pedal which works with my M530 pedals. I…

rspduo desk stand

Desk stand for the SDRplay rspduo SDR