Core One L Kfz Kennzeichen "CORE ONE L" (German-EU) license number plate Einzeilig
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.12 – €2.60 net (excluding VAT)
For file: Kfz_Kennzeichen_D-CORE_ONE_L_0.4n_0.15mm_PETG,PETG,PETG,PETG_MK4SMMU3_2h7m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.36 excluding VAT (range midpoint).
- Weight reported by the author
- 37 g
- Print time reported by the author
- 2.12 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Deutsches Beispiel EU-Kennzeichen "CORE ONE L" license fan number plate
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Deutsches Beispiel EU-Kennzeichen "CORE ONE L" Lang und Einzeilig. Diese Varianten sind auf den kleineren Normmaßen (420mm & 460mm) für Kennzeichen.
"CORE ONE L" Fan number plate
More of my license number plates:
https://www.printables.com/model/1200241-kfz-kennzeichen-sample-german-eu-number-plate-einz
https://www.printables.com/model/1201725-number-plate-mak-er-101-kfz-kennzeichen-german-eu
https://www.printables.com/model/1201656-number-plate-cz-i-print-prusa
https://www.printables.com/model/1201555-number-plate-meine-perle-kfz-kennzeichen-german-eu
https://www.printables.com/model/1200233-number-plate-sample-kfz-kennzeichen-german-eu-zwei
If You like to get your individual plate, send me a personal message.
Settings | Value |
|---|---|
Infill | 25% (adaptive cubic) |
Perimeters | 2 |
Layer Height | 0.15 mm Structure |
Material | PETG / PLA |
Supporting Material | none |
Comments | |
Ironing | no (not needed, but creates a cleaner surface) |
Feedback is welcome.
Share your makes!