OpenRC Tractor Mk3 TEA20 - Revised Rear Axle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Revised rear axles for the OpenRC Tractor Mk3 TEA20. Corrects issues with slippage and fitting loosely.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 32
- Makes
- 0
- Views
- 128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an updated axle to the OpenRC Mk3 Tractor, resized and revised to fit better and eliminate slippage issues on the original part.
The updated version fits much more securely onto the motor shaft, with the wheel bearing working to clamp it down to prevent slipping. The wheel side also fits better into the wheel hub to eliminate issues with wobbling. Screw hole is also slightly smaller to prevent it being stripped out. The bearing will be a very snug fit by design.
Drop-in replacement for part number 9, rear axle, on the OpenRC design. No modifications required.
Recommended to print at 100% infill and 0.10 to 0.20 layer heights. No brim or support required.