Nocuta Fan for Meanwell LRS-350 PSUs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows a Noctua fan to be added to the Meanwell LRS-350-* so it is quieter
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
So the Meanwell LRS-350 PSU's are notoriously loud. This mod fixes that by allowing the use of a Noctua fan installed instead. The model was based on Scott Yu-Jan's model where he installed one on an Ender 3 Pro. Unfortunately, that did not work with the LRS-350 PSU's, so I adapted it to be higher so it did.
Measurements:
Height: 70mm
Cover photos taken on iPhone 14, 1:1 aspect ratio, Modified in OnShape
Important:
When crimping / soldering the wires to the connector, please reference this guide: https://bleepitybloopity.com/posts/pwmfans/
When buying the fan, please get a 12V fan, as these PSU's only use 12V fans, consider getting one from here (Not Affiliate) https://a.co/d/dVGRt9r