Nocuta Fan for Meanwell LRS-350 PSUs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows a Noctua fan to be added to the Meanwell LRS-350-* so it is quieter
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So the Meanwell LRS-350 PSU's are notoriously loud. This mod fixes that by allowing the use of a Noctua fan installed instead. The model was based on Scott Yu-Jan's model where he installed one on an Ender 3 Pro. Unfortunately, that did not work with the LRS-350 PSU's, so I adapted it to be higher so it did.
Measurements:
Height: 70mm
Cover photos taken on iPhone 14, 1:1 aspect ratio, Modified in OnShape
Important:
When crimping / soldering the wires to the connector, please reference this guide: https://bleepitybloopity.com/posts/pwmfans/
When buying the fan, please get a 12V fan, as these PSU's only use 12V fans, consider getting one from here (Not Affiliate) https://a.co/d/dVGRt9r