Ultra-Light Geometric Laptop Stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.35 – €2.88 net (excluding VAT)
For file: Phone Extension.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.61 excluding VAT (range midpoint).
- Weight reported by the author
- 33 g
- Print time reported by the author
- 2.6 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Ergonomic stand for M1 MacBook Air. Tested on Prusa Mini, 0.20mm Structural. Needs only "Support on build plate".
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 2
- Views
- 74
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Elevate your workstation with this minimalist, high-performance laptop stand. This model focuses on structural integrity while minimizing filament usage. The open-frame geometry ensures your laptop stays cool by allowing maximum airflow.
Tested & Proven: This design has been thoroughly tested with a 13" M1 MacBook Air, providing a perfect, wobble-free fit. It was printed on a Prusa MINI+ using the "0.20mm Structural" profile, resulting in excellent part strength and finish.
Key Features:
Perfect Fit: Optimized for the MacBook Air 13" (M1) but fits most 13-14" laptops.
Print-Tested: Scaled perfectly for the Prusa MINI build plate.
Minimal Supports: Designed to be printed on its side with Supports on build plate only.
Passive Cooling: Open-truss design prevents heat buildup.
Recommended Print Settings
Printer: Prusa MINI / MINI+
Material: PLA
Layer Height: 0.20mm (Structural profile)
Infill: 15%
Supports: Yes - On build plate only (Support on build plate)