Ecobee SmartSensor Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple sit-in wall mount for the Ecobee SmartSensor (newer generation).
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 100
- Makes
- 1
- Views
- 260
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple sit-in wall mount for the newer, more rounded style of Ecobee SmartSensor. It has a recess in the inside bottom for an 8mm x 2.5mm magnet (optional, just for a more secure hold). I used a 3M command strip (from a Small wire hooks, 16mmW x 28mmH), the mounting surface is roughly 30mmW x 30mmH.
Printed with the model as oriented, no supports required. Print in smaller layer height if you want to reduce the visibility of the top edge fillets.
If you like the model but need a different magnet size, comment or send a message and I will do my best to adjust and upload.