P
PrintablesYoungsterJon
Ecobee SmartSensor Stand
Replacement stand for Ecobee SmartSensors. The stand press fits into the bottom of the sensor. Optional 3mm diameter magnet can be placed in the center.
- Downloads
- 313
- Likes
- 21
- Rating
- 5
Search results: ecobee
Counting matching models…
P
PrintablesMacaroni Love
Ecobee room sensor wall mount
Warning : I noticed that Ecobee changed the design of their smart sensor. I only could look at pictures of the new sensor and the back looks much more spherical, it probably won't be compatible with this wall mount. I used the original…
- Downloads
- 244
- Likes
- 20
- Rating
- 5
P
PrintablesYang
Ecobee sensor 90 & 100 degree wedges
These are wedges to mount Ecobee Smart Sensors (not the Room Sensor) at a different angle than Ecobee intended. These will point the face of the Smart Sensor at 90 degrees and 100 degrees from the mounting surface. Ecobee recommends…
- Downloads
- 196
- Likes
- 21
- Rating
- 5
P
PrintablesPeterson Daughtry
Ecobee Trim Plate
Switched from google nest to ecobee so I needed a new trim plate. There are two versions. One is flat and the other is slightly rounded.
- Downloads
- 179
- Likes
- 10
- Rating
- 5
P
Printableshwmonkey
Ecobee Recessed Mount
Lots of people complain about the appearance of the Ecobee. I think it has to do with the giant white circle around the unit, and the fact it hangs off the wall so far. Every day I looked at my Ecobee, it bothered me. So I solved the…
- Downloads
- 158
- Likes
- 8
- Rating
- 0
P
PrintablesRanchBear
EcoBee SmartSensor BackCover
Factory backcover modelled for DIY installation Angled backcover - https://www.printables.com/model/725307-ecobee-smart-sensor-angled-back-cover
- Downloads
- 130
- Likes
- 3
- Rating
- 0
P
PrintablesAndrew Zenk
Ecobee Enhanced Trim Ring
A trim ring that mounts on a standard electrical box and provides a mounting surface for the Ecobee thermostat. The Ecobee mounts via 4 M3 threaded inserts. I'm using the ‘enhanced’ version of the Ecobee. It may fit others, but I haven't…
- Downloads
- 108
- Likes
- 11
- Rating
- 5
P
Printablestrrevvorr
Ecobee SmartSensor Clip
I designed this to strap Ecobee's temperature sensor to a bassinet so the room's temperature is tailored to the baby. Print with supports and extra outer layers for best results.
- Downloads
- 107
- Likes
- 9
- Rating
- 0
P
PrintablesIan_Makes
Ecobee SmartSensor Wall Mount
This is a simple sit-in wall mount for the newer, more rounded style of Ecobee SmartSensor. It has a recess in the inside bottom for an 8mm x 2.5mm magnet (optional, just for a more secure hold). I used a 3M command strip (from a Small…
- Downloads
- 100
- Likes
- 6
- Rating
- 5
P
Printableswedgeworks
ecobee 3 Dummy Load model for wall plate CAD (CAD-ish?) design
The kind folks at the local HVAC shop decided I needed to be reminded of their existence by stamping the wall plate of the thermostat with their business name and phone number. Additionally, the wall plate is MASSIVE. In order to generate…
- Downloads
- 73
- Likes
- 7
- Rating
- 5
P
PrintablesXYZBenchy
Ecobee SmartSensor Wall Bracket/Shelf Mount
This model functions as a small shelf to place the Ecobee SmartSensor using the provided table mount base. The design allows for the use of one #8 (or M4) round head screw or a 3M Command Strip. I intended to wall-mount one of the…
- Downloads
- 72
- Likes
- 13
- Rating
- 0
P
Printablesleft4prusa
Ecobee premium thermostat wall plate with key hook
This Ecobee premium wall plate is designed to work with 1-gang US standard outlet. Use OD 6mm heat insert to fasten the ecobee wiring connector backplate.
- Downloads
- 52
- Likes
- 6
- Rating
- 0
P
Printablesandku85
Garage Overhead Door Sensor Vertical EcoBee
Saw a lot of them out there for other companies and nothing for EcoBee. since I needed it to stand vertical because of the motion sensor made one with a slight change. only needed supports
- Downloads
- 45
- Likes
- 4
- Rating
- 0
P
PrintablesSoundDoc
Ecobee 3 surface mount
Recently upgraded my main thermostat to a EcoBee 4, so I had a “Spare” Ecobee 3… After rewiring the IR tube heater in the garage I needed a way to surface mount the stat/wire as going through the drywall at this time wasn't a option.…
- Downloads
- 43
- Likes
- 2
- Rating
- 0
P
PrintablesBarnyardingan
Ecobee SmartSensor Print-in-Place Ceiling Mount
Printed on a MK3 w/ 0.2mm nozzle using Esun PLA+. Found I had to sometimes use a flat edge to dislodge the upper and lower parts to allow it to swivel freely, but this may be solved by reducing the nozzle temperature. Allowed me to…
- Downloads
- 37
- Likes
- 5
- Rating
- 0
P
PrintablesStockmaster
Sunshade for Ecobee Premium Thermostat
Simple sun-blocking frame for Ecobee Smart Thermostat Premium. Direct sunlight on the thermostat can greatly impact temp readings, use this to reduce the impact.
- Downloads
- 22
- Likes
- 1
- Rating
- 0
P
Printablesvidision
Ecobee Sensor Stand
A basic replacement. Meant to be printed on its back as oriented without supports. I found this a tricky print just due to the design of the Ecobee retention slot itself. I had to reprint and adjust dimensions by 0.1mm several times to…
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesArcinix
Ecobee thermostat bracket
I needed to create a stronger mount for the Ecobee thermostat, as the wall had multiple holes from previous installations. I used PLA because it was what I had available, but using PLA+ or another material might have been a better choice.…
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
Printablescopyrunfun
Ecobee Electrical Box Mounting Plate
This is an adapter plate to mount an Ecobee smart thermostat to a 2 gang electrical box using the original included hardware that was intended to mount to a wall. Suggested Print Settings: 4 walls 5 top and bottom layers
- Downloads
- 16
- Likes
- 1
- Rating
- 5
P
Printables
Ecobee 4 surface mount
So, it doesn't seem that long ago, but after upgrading my main thermostat to a Ecobee 4 I was the lucky recipient of a Ecobee premium stat… So naturally the 4 replaced the 3, and needed the same kind of wall spacer surface mount. After…
P
Printables
Ecobee Electrical Box Mounting Plate
This is an adapter plate to mount an Ecobee smart thermostat to a 2 gang electrical box using the original included hardware that was intended to mount to a wall. Suggested Print Settings: 4 walls 5 top and bottom layers
P
Printables
ecobee 3 Dummy Load model for wall plate CAD (CAD-ish?) design
The kind folks at the local HVAC shop decided I needed to be reminded of their existence by stamping the wall plate of the thermostat with their business name and phone number. Additionally, the wall plate is MASSIVE. In order to generate…
P
Printables
ecobee 3 display cover
For some unknown reason, developer decided to place the thermostat on the wall in master bedroom. It wasn't a problem until I replaced an original “dumb” thermostat with ecobee 3 Lite. ecobee 3 Lite has a bad habit of flashing the screen…
P
Printables
Ecobee 4 surface mount
So, it doesn't seem that long ago, but after upgrading my main thermostat to a Ecobee 4 I was the lucky recipient of a Ecobee premium stat… So naturally the 4 replaced the 3, and needed the same kind of wall spacer surface mount. After…
P
Printables
Ecobee Smart Sensor Shelf (Remix)
Minor remix of this model: https://www.thingiverse.com/thing:4934327 Printed on MK4S in PLA, .4mm nozzle, .2mm layer height, 25% adaptive cubic infill
P
Printables
Ecobee with Voice Control Trim Plate
Large trim plate made for Ecobee with voice control Might also work for other models
P
Printables
Ecobee Essential Pole mount
Attached to a basement support column using a Velcro strap. Part has routing for cables and room for wire breakout on the back.
P
Printables
Ecobee Sensor AAA Conversion
I get annoyed whenever I get low battery or frequent disconnections from my Ecobee room sensors. This print is a conversion from CR2032 style batteries to AAA batteries. This project requires an electrical solder. The AAA battery housing…
P
Printables
Ecobee Room Sensor Wall Mount - Variable Angle
Holder for Ecobee battery powered motion and temperature sensor with a variable angle option. Note, the two tone print you see here is simply because I wanted to use up my remaining spool of black filament. It does kind of nicely…
P
Printables
Ecobee Smart Thermostat Base Plate
Replaced a large thermostat with the Ecobee unit. Instead of purchasing a base plate, designed my own. I designed this to be printed with the visible side down so that it has a nice texture when printed on a textured build plate. Could…
P
Printables
Articulating mount for Ecobee Room Sensor
I'm using Ecobee room sensors (the older style) as motion detectors and wanted to be able to adjust where they point. I have designed the mount to articulate in 2 dimensions, which combined with the way the sensor rotates around the cover…
P
Printables
Ecobee Sensor Angled Corner Mount
Ecobee Sensor Angled Corner Mount. Does not require supports.
P
Printables
Ecobee Sensor Wall Mount
I recommend printing with a .10 mm layer height to ensure the fine details print properly. No support was needed.
P
Printables
Ecobee Frame with hooks
A simple frame to go around the Ecobee thermostat. Has 2 hooks at the bottom.
P
Printables
ecobee 3 Wall Plate
The folks who installed the thermostat before I moved in labelled the wall plate with their business info. I guess they thought their advertising was more important than aesthetics! Anyway, I re-designed the plate so, if in the future I…
P
Printables
Ecobee Smart Sensor Angled Back Cover
Modified back cover for ecobee smart sensor to wall mount around 10 degree angled If you want the base model to modify for your need follow the link below https://www.printables.com/model/725330-ecobee-smartsensor-backcover