1 / 4
Torus Part Cooler for Toranado Precision Geared Extruder v2.1
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
blows air in an arc of 250deg around the nozzle
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 1
- Views
- 210
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This improved part cooler will blow air in an arc of 250deg around the nozzle (original: 75deg). The hotend quickchange function still works with the 20x16x12mm heater block. If you have mounted your heater block so the cartridge is on the other side, just mirror the .stl in your slicer.
I made this for the LH version of the toranado: https://www.thingiverse.com/thing:1246951 - check on your own if it works for the other versions!
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
20
Notes:
Print like original
Category: 3D Printer Extruders