1 / 2
Elation KL Par FC Lens Rubber Ring — image 1
1 / 2

Elation KL Par FC Lens Rubber Ring

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The rubber mounting ring for KL Par lenses to allow for color coding

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
35
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Print in TPU - the part's geometry has been modified to not require supports.

Elation KL Pars come with 4 lenses - wide, medium, narrow, and very narrow.  They are a plastic disk installed into a rubber ring, which then latches into the fixture.  I got sick of trying to find enough of the correct lens quickly, so I modeled up the rubber ring and printed out of different colored TPUs.  Each type of lens now has its own color and I can know at a quick glance which is which.  Each ring takes about 1hr to print on my H2D with minimal tweaks to slicer settings.

I did originally model the rubber exactly as it is on the fixture.  This required supports, as the channels for both the lens and the fixture have 90 degree overhangs.  Adding PLA supports added about 2 hours of time to the print and a fair bit of waste, so I added a chamfer.  I see no meaningful change in how this interfaces with light or fixture in use.  I can provide the "unmodified" version if requested though.

Tags