Customizable Ramekin Stacker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ramekin stacking rings: My ramekins wouldn't stack properly - the stack would tip when they got too high. These…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 0
- Views
- 266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Ramekin stacking rings: My ramekins wouldn't stack properly - the stack would tip when they got too high. These plastic rings are sized to give a firm base for the next one, with a ring ledge to keep them aligned.
To cut down on material and avoid needing support, print two of them, and glue them together.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
0%
Filament: Monoprice PLA Clear
Notes:
Print two. Glue together with cyanoacrylate glue. While gluing, use at least two pieces of scrap filament as alignment pins.
After looking at https://www.thingiverse.com/thing:4277881rnrnhis design grips the inner wall of the lower rameking but needs support to print. An OpenSCAD version of that would be:rnrn /outer diameter of ramekin /rn outerDia=85;rnrn /inner diameter of ramekin /rn innerDia=73;rnrn /wall thickness in the radial dimension /rn thickR=4;rnrn /wall thickness in the Z dimension /rn height=8;rnrn /ring connector thickness /rn floor=1.2;rnrn $fn=120;rnrn difference(){rn union(){rn translate([0, 0, height])cylinder(d=outerDia+thickR, h=height+floor);rn cylinder(d=innerDia, h=height+thickR);rn }rn translate([0, 0, height+floor])cylinder(d=outerDia, h=height+floor);rn translate([0, 0, -thickR])cylinder(d=innerDia-thickR, h=2*(height+thickR));rn }rnrn
Category: Kitchen & Dining