Riser is only for Creality K2 Pro with glass.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Riser is only for K2 Pro with glass.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 63
- Makes
- 2
- Views
- 654
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I looked up the design from the Bambu community. But since Riser did not find a similar design for the K2 PRO, he made the model himself. There is only support in two places where the dovetail connection is used. (Unfortunately, I did not find a solution to make the first cut at 90 degrees). I used a tolerance of 0.3 in the dovetail joint, as I planned to install it on glue. Additionally, I pasted thick paper at the points of contact with the glass, since glass does not like irregularities. I used the "Gyroid" filling by 15%. This is enough for durability and printing speed.
Tip: for high-quality surface printing, print as far away from the side fan as possible, so there will be no damage from the air jet. I also attached the layout file.
PS And yes, the cooling is good, until the temperature rise is detected with the door closed.
PSS I have a better version: