Refill Funnel Adapter for FLUX RF800 (50 ml Bottle)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Funnel adapter to cleanly refill the FLUX RF800 50 ml bottle from larger containers (e.g., 1 L).
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 1
- Views
- 41
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This funnel adapter is made for clean and easy refilling of the FLUX RF800 50 ml bottle from larger containers (e.g., 1 L). It reduces spills, speeds up refills, and improves handling at the workbench.
Key feature: fits the 1 L cap (upside down)
A practical detail: the funnel is designed so that it fits perfectly onto the 1 L bottle cap when flipped upside down.
This makes it easy to park/store the funnel on the large bottle between refills and helps keep things tidy.
Reference product: https://eleshop.de/termopasty-rf800-smd-flux-1l.html
Compatibility
Designed for the FLUX RF800 50 ml bottle (Termopasty / RF800 SMD flux).
Optimized for refilling from the 1 L RF800 bottle.
Print settings (recommended starting point)
Material: PLA
Layer height: 0.20 mm
Orientation: upside down
Supports: ideally none
How to use
Place the adapter onto the 50 ml bottle.
Pour slowly from the 1 L bottle.
After refilling, flip the funnel and place it onto the 1 L bottle cap for storage.
Safety / chemical compatibility note
Flux can contain solvents. Plastic compatibility depends on the exact flux formulation and the filament used.
Recommendations:
Keep contact time short (use for refilling, not for long-term storage).
Test your filament with a small amount first (check for softening/cracking).
Follow the manufacturer’s safety guidance (gloves/ventilation, etc.).
Feedback / improvements
If you need a variant for a different bottle neck or a narrower spout, leave a comment and I can adapt the design.