1 / 5
Refill Funnel Adapter for FLUX RF800 (50 ml Bottle) — zdjęcie 1
1 / 5

Refill Funnel Adapter for FLUX RF800 (50 ml Bottle)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Funnel adapter to cleanly refill the FLUX RF800 50 ml bottle from larger containers (e.g., 1 L).

Ocena
5 / 5
Polubienia
1
Pobrania
7
Wydruki
1
Wyświetlenia
41
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

This funnel adapter is made for clean and easy refilling of the FLUX RF800 50 ml bottle from larger containers (e.g., 1 L). It reduces spills, speeds up refills, and improves handling at the workbench.

Key feature: fits the 1 L cap (upside down)

A practical detail: the funnel is designed so that it fits perfectly onto the 1 L bottle cap when flipped upside down.

This makes it easy to park/store the funnel on the large bottle between refills and helps keep things tidy.

Reference product: https://eleshop.de/termopasty-rf800-smd-flux-1l.html

Compatibility

  • Designed for the FLUX RF800 50 ml bottle (Termopasty / RF800 SMD flux).

  • Optimized for refilling from the 1 L RF800 bottle.

Print settings (recommended starting point)

  • Material: PLA

  • Layer height: 0.20 mm

  • Orientation: upside down

  • Supports: ideally none

How to use

  1. Place the adapter onto the 50 ml bottle.

  2. Pour slowly from the 1 L bottle.

  3. After refilling, flip the funnel and place it onto the 1 L bottle cap for storage.

Safety / chemical compatibility note

Flux can contain solvents. Plastic compatibility depends on the exact flux formulation and the filament used.

Recommendations:

  • Keep contact time short (use for refilling, not for long-term storage).

  • Test your filament with a small amount first (check for softening/cracking).

  • Follow the manufacturer’s safety guidance (gloves/ventilation, etc.).

Feedback / improvements

If you need a variant for a different bottle neck or a narrower spout, leave a comment and I can adapt the design.

Tagi