1 / 2
Punch Tube Cut Guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quickly line up punch tube in a horizontal band saw with either a 1/2" or 1/4" distance from the center of the last hole
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Punch tubing is very popular with robotics teams. We have a Grizzly G0613 horizontal band saw and highly recommend for FRC teams. This guide with the bumps inserted into the punched tube holes, is used to align the tube either .25 or .5 from a hole. Tighten the vise, remove the guide and cut.
We print with two colors on a Prusa XL-5 to make the text stand out.