1 / 2
HP 45W USB-C laptop charger holder for openGrid+MultiConnect+Underware — image 1
1 / 2

HP 45W USB-C laptop charger holder for openGrid+MultiConnect+Underware

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This can be used to attach a HP 45W charger to an openGrid board using MultiConnect tiles.

Rating
0 / 5
Likes
4
Downloads
21
Makes
0
Views
196
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is for attaching a HP 45W USB-C laptop charger to an openGrid board using multiconnect.

Print one of each part, using the settings you used for the other components of your openGrid setup. This power adaptor is not very heavy.
You will also need to print 2 multiconnect tiles for openGrid to fit into the holder, and however much openGrid tiles as you want. The footprint of this thing is about 5x3 openGrid cells.

fit the multiConnect tiles into the clamshell parts. Then fit the clamshell around the charger and finally attach to the board.

It should be farily easy to use if you're familiar with similar parts already but if you need help let me know.

Tags