300×420 Ultimate Hat Jig for Laser Engraving – xTool S1/S2 & WeCreat (STL + 3MF)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ultimate Hat Jig sized 300mm × 420mm for lasers with a 300mm wide bed (xTool S1/S2, WeCreat).
- Rating
- 0 / 5
- Likes
- 5
- Makes
- 0
- Views
- 220
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Standard Digital File License
300MM × 420MM Ultimate Hat Jig (Digital Files Only)
I’ve had a lot of requests for a 300mm wide-bed version for the WeCreat and xTool S1/S2 lasers. This 300mm × 420mm Ultimate Hat Jig is designed to fit those beds, but you will likely engrave in sections and manually rotate the hat due to working area limits. Please check your machine specs before downloading/printing.
I’ve included a side-by-side picture for comparison purposes only with the regular-sized Ultimate Hat Jig (not included).
I’ve been obsessing over designing the perfect hat jig, and this is the jig I wish I had from day one. The Ultimate Hat Jig gives you a stable platform, a one ring system, and total control over placement—so you get clean, consistent, high-end burns on felt and suede hats every single time.
Perfect for
Laser engravers
Etsy sellers
Custom hat shops
Makers using lasers with at least a 300mm × 420mm bed
Anyone wanting repeatable, professional hat engraving results
What This Jig Solves
Wide-brim hat engraving is normally a headache because:
The crown rocks or tilts
The brim won’t sit flat
Alignment from seam to seam is hard
The laser head hits whatever you’re using to anchor the hat
This jig eliminates all of that—giving you a stable, predictable, repeatable workflow.
Included Hat Ring (Edge-to-Edge Pin Ring)
One included ring that can be secured with M6 × 35mm fasteners or glued/taped in place.
Ring features
Low-profile so the laser head clears without collisions
Holes every 20mm to pin the hat edge
Ideal for edge-to-edge engraves and fast alignment
Designed to be fastened with M6 × 35mm hardware (optional) or glued/taped
On the main jig surface you’ll find 2mm anchor holes across the platform so you can pin the hat exactly where you want it.
Key Features & Specs
Machine Compatibility
Designed for lasers with a minimum bed size of 300mm × 420mm.
Fits the bed size commonly found on xTool S1/S2 and WeCreat units with a 300mm wide bed (verify your exact model/work area).
Stability Options
Removable feet for a wider footprint
Platform holes to bolt the jig down if needed
Dimensions
Overall: 300mm × 420mm × 165mm (height)
Opening: 205mm × 175mm
Hardware
Legs: 10M × 1" (optional)
Seam supports on XY table: (8) M6 × 25mm fastener + nut (required)
Ring: (4) M6 × 35mm fastener + nut (optional)
Print Notes
Use 35%+ support threshold (or add manual supports) for clean dowel holes
15% infill (table can be 10%)
Hat models tested
WillieAndDollyDesign — Vegan Suede Hat Blank
Hobby Lobby white felt hat
What You Get (Digital Files Only)
You will receive:
STL/3MF original files (all components; legs + feet included)
3MF sliced files (ready to print on Bambu or compatible slicers)
No physical product is shipped.
Usage & License
Files may not be sold, shared, or redistributed in any form
Physical products (Etsy):
https://songdawgdesigns.etsy.comSupport more designs (Patreon):
https://patreon.com/SongDawgDesigns