1 / 9
300×420 Ultimate Hat Jig for Laser Engraving – xTool S1/S2 & WeCreat (STL + 3MF) — zdjęcie 1
1 / 9

300×420 Ultimate Hat Jig for Laser Engraving – xTool S1/S2 & WeCreat (STL + 3MF)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ultimate Hat Jig sized 300mm × 420mm for lasers with a 300mm wide bed (xTool S1/S2, WeCreat).

Ocena
0 / 5
Polubienia
5
Wydruki
0
Wyświetlenia
220
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Standard Digital File License

300MM × 420MM Ultimate Hat Jig (Digital Files Only)

I’ve had a lot of requests for a 300mm wide-bed version for the WeCreat and xTool S1/S2 lasers. This 300mm × 420mm Ultimate Hat Jig is designed to fit those beds, but you will likely engrave in sections and manually rotate the hat due to working area limits. Please check your machine specs before downloading/printing.

I’ve included a side-by-side picture for comparison purposes only with the regular-sized Ultimate Hat Jig (not included).

I’ve been obsessing over designing the perfect hat jig, and this is the jig I wish I had from day one. The Ultimate Hat Jig gives you a stable platform, a one ring system, and total control over placement—so you get clean, consistent, high-end burns on felt and suede hats every single time.


Perfect for

  • Laser engravers

  • Etsy sellers

  • Custom hat shops

  • Makers using lasers with at least a 300mm × 420mm bed

  • Anyone wanting repeatable, professional hat engraving results


What This Jig Solves

Wide-brim hat engraving is normally a headache because:

  • The crown rocks or tilts

  • The brim won’t sit flat

  • Alignment from seam to seam is hard

  • The laser head hits whatever you’re using to anchor the hat

This jig eliminates all of that—giving you a stable, predictable, repeatable workflow.


Included Hat Ring (Edge-to-Edge Pin Ring)

One included ring that can be secured with M6 × 35mm fasteners or glued/taped in place.

Ring features

  • Low-profile so the laser head clears without collisions

  • Holes every 20mm to pin the hat edge

  • Ideal for edge-to-edge engraves and fast alignment

  • Designed to be fastened with M6 × 35mm hardware (optional) or glued/taped

On the main jig surface you’ll find 2mm anchor holes across the platform so you can pin the hat exactly where you want it.


Key Features & Specs

Machine Compatibility
Designed for lasers with a minimum bed size of 300mm × 420mm.
Fits the bed size commonly found on xTool S1/S2 and WeCreat units with a 300mm wide bed (verify your exact model/work area).

Stability Options

  • Removable feet for a wider footprint

  • Platform holes to bolt the jig down if needed

Dimensions

  • Overall: 300mm × 420mm × 165mm (height)

  • Opening: 205mm × 175mm

Hardware

  • Legs: 10M × 1" (optional)

  • Seam supports on XY table: (8) M6 × 25mm fastener + nut (required)

  • Ring: (4) M6 × 35mm fastener + nut (optional)


Print Notes

  • Use 35%+ support threshold (or add manual supports) for clean dowel holes

  • 15% infill (table can be 10%)

Hat models tested

  • WillieAndDollyDesign — Vegan Suede Hat Blank

  • Hobby Lobby white felt hat


What You Get (Digital Files Only)

You will receive:

  • STL/3MF original files (all components; legs + feet included)

  • 3MF sliced files (ready to print on Bambu or compatible slicers)

No physical product is shipped.


Usage & License

Tagi