LTT Screwdriver Wall Display
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
When you need to be extra (like me) and display one or multiple of your LTT screwdrivers. A simple wall mount design.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
A simple and repeatable wall mount holder for the LTT screwdriver! Created with the though of singular mount or multi mount if you're into collecting.
An inset file is being provided as well. Depending on print settings you may want to scale it down 1-2% or be willing to sand any overhang. Print with curved side down, tree support enabled.
Print the mount vertically upside down. Will only require minor tree support, no raft, .16mm layer height suggested as it does not add much time.
The individual and multi support were inspired by the wonderful https://www.printables.com/model/926124-universal-wall-mount-easy-to-print. It did have to be fully reworked from the ground up for this particular build so its custom for this part. Use the above for any real universal mount needs.
Finally, a small adapter shaft was provided as well just in case you have a stubby screwdriver. The knurling on the stubby exists for the entire shaft, causing it to struggle to fit securely. this adapter provides the necessary lift to compensate.