1 / 5
Tyre-Up
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lift the tyre of the ground for easier cleaning!
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 58
- Makes
- 0
- Views
- 512
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print 1 per tyre. Drive the car onto the tyre-up.
Make sure the tyre is hanging over the edge with the sidewall. You can clean/dress the tyre without the bottom touching the ground leaving an untreated spot.
As an extra there's also a pressure washer hose guide on the front of the item so the hose won't get stuck under the tyre while cleaning around the car.
Print instructions:
Use a strong filament like PETG at 50% infill, gyroid. This should be strong enough.
You can reduce infill when using it with lighter cars.