Simple Webcam Lens Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple lens cover for a generic webcam that attaches by gripping the focus ring around the lens.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 52
- Makes
- 1
- Views
- 219
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple lens cover for a generic webcam that attaches by gripping the focus ring around the lens.
There are three versions:
Original: Designed to use a piece of scrap filament as the hinge pin
Thinner: Same as the original, but with a thinner cover
Snap Together: Same as the Thinner version, but does not need a hinge pin.
Print Settings
Printer Brand:
Creality
Printer:
CR-6 SE
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Inland PLA + Neon Green
Notes:
You can slightly resize the split ring by placing the fingers in boiling water for a few seconds, then either tightening or widening the gap.
Don't leave it in the boiling water for more than a few seconds!
Category: Camera