Wall-mounted acoustic guitar hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Three printed parts are required for proper functionality.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The holder allows fine position adjustment on the wall, ensuring the guitar is held securely and correctly.
Printing recommendations:
Material: PETG-CF
PETG, PC, ABS, or ASA can also be used.
Due to the threaded parts, PLA is not recommended.Infill: 25% (almost any infill pattern works)
Mounting instructions:
The print includes a “punch tool” used to mark the drilling position on the wall.
First, assemble the base together with the punch tool and the holder. Use the punch tool to mark the drilling location on the wall. After drilling the hole, replace the punch tool with the washer and fully mount the holder to the wall.