1 / 4
Battery extender and holder for larger LiPo packs. Rlaarlo Omni Terminator — image 1
1 / 4

Battery extender and holder for larger LiPo packs. Rlaarlo Omni Terminator

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Battery extender and holder for Rlaarlo Omni Terminator. Fits larger LiPo packs using stock holes. No chassis mod needed

Rating
0 / 5
Likes
8
Downloads
93
Makes
0
Views
405
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is a simple battery extender and holder for the Rlaarlo Omni Terminator.
It lets you run larger and longer LiPo batteries that do not fit the stock tray.

The part moves the battery position slightly forward and gives a solid vertical stop.
It also keeps the battery strap aligned and prevents side movement during hard driving.

Fits Zee 2S 5200mAh batteries.

Uses the mounting holes where the ESC was.

My print settings
• Material: PLA+ works. PETG recommended for durability
• Layer height. 0.2 mm
• Infill: 20 to 30 percent
• Walls: 3 perimeters
• Supports: Yes (Tree)
• Print orientation: Flat on the base

I used 2 straps to fit the bigger battery.

If you want changes
Tell me your battery dimensions and chassis version.
I can tweak height, width, or strap slot position.

Tags