1 / 4
Battery extender and holder for larger LiPo packs. Rlaarlo Omni Terminator — zdjęcie 1
1 / 4

Battery extender and holder for larger LiPo packs. Rlaarlo Omni Terminator

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Battery extender and holder for Rlaarlo Omni Terminator. Fits larger LiPo packs using stock holes. No chassis mod needed

Ocena
0 / 5
Polubienia
7
Pobrania
92
Wydruki
0
Wyświetlenia
401
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

This is a simple battery extender and holder for the Rlaarlo Omni Terminator.
It lets you run larger and longer LiPo batteries that do not fit the stock tray.

The part moves the battery position slightly forward and gives a solid vertical stop.
It also keeps the battery strap aligned and prevents side movement during hard driving.

Fits Zee 2S 5200mAh batteries.

Uses the mounting holes where the ESC was.

My print settings
• Material: PLA+ works. PETG recommended for durability
• Layer height. 0.2 mm
• Infill: 20 to 30 percent
• Walls: 3 perimeters
• Supports: Yes (Tree)
• Print orientation: Flat on the base

I used 2 straps to fit the bigger battery.

If you want changes
Tell me your battery dimensions and chassis version.
I can tweak height, width, or strap slot position.

Tagi