1 / 10
Ender 3 V2 Gantry Adjustable Pi Camera Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry Pi Camera bracket for the X gantry of the Ender 3 series printers
- Rating
- 4.714 / 5
- Likes
- 40
- Downloads
- 229
- Makes
- 8
- Views
- 1,904
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I really liked this X axis camera mount and made a few changes
- First I added a little hood to push the flex-cable out towards the back so the cable would be oriented properly as the gantry moved up and down
- I added a notch on the case and backplate to help hold the enclosure shut
- I stretched the arm out so you could better see past any cooling ducts
- I added recessed holes to install M3 nuts into for ease of installation. The fit is very tight, so you'll want to set your printer for max dimensional accuracy
I used 12mm M3 socket cap bolts to install the bracket
I printed the arm/nutplate at 0.2mm in PETG+ and the housing at 0.12 in PLA+ in the hopes that the PETG would retain strength and hold a nice tight fit over time
Compatible with BL-Touch and CR-Touch