1 / 7
Smart Meter housing for ESP8266 and IR-module
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a housing for both, the IR-module for reading the power consumption from a smart meter and an ESP 8266.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a combined housing for a smart meter reader IR board and an ESP 8266.
It was made for a"bitshake SmartMeterReader - UART" module. It reduces the wires hanging around.
Printed in ASA, but any Filament will do.
Used 0,15mm layer height to have three layers in the base layer.
Do not forget to like, if You like!