Smart Digital Photo Frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SMART DIGITAL PHOTO FRAME WITH ESP32 & 7-INCH IPS SCREEN
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Standard Digital File License
Breathe eternal life into your favorite moments! Build your own elegant digital photo frame with a vibrant 7-inch display. This is not just a case — it's a complete DIY project with open-source firmware, all for just ~€35!
A perfect gift for yourself or loved ones, designed to light up any room with a slideshow of your most precious memories.
✨ WHY THIS PROJECT IS A GREAT DEAL:
🎁 All-in-One Solution: You get more than just STL files. This is a full package: a 3D-printable case, optimized firmware, and detailed assembly instructions.
💸 Super Affordable: The total component cost (excluding filament) is only about €35. Cheaper and more rewarding than any store-bought frame!
🖼 Perfect Picture Quality: A sharp 7-inch IPS display with 800x480 resolution delivers bright, vivid colors and wide viewing angles.
🔧 Full Control: Customize slideshow speed and screen brightness. Easily update photos by simply swapping files on the SD card.
📦 Easy Assembly: The case is designed to print mostly without supports and features a snap-fit design — no screws needed! All necessary component links are included.
📦 WHAT'S INCLUDED IN YOUR DOWNLOAD:
3D-Printable Models (STL): Optimized case parts.
Ready-to-Flash Firmware Files (.bin) for easy browser-based installation.
Firmware Source Code (GitHub link) for developers.
COMPREHENSIVE GUIDE in English: covering flashing, photo preparation, and final assembly.
🛠 REQUIRED COMPONENTS (ALL ALIEXPRESS LINKS ARE IN THE GUIDE):
ESP32-8048S070C board (with display and SD card slot).
MicroSD Card (FAT32 formatted).
Type-C Connectors (male/female) for the power cable. (Instead of male, you can use JST 1.25mm 4 pin)
Some PLA or PETG filament.
USB-C cable and a 5V/2A power adapter.
🚀 HOW IT WORKS? (IT'S SIMPLE!):
Flash the firmware to the board in 2 minutes using a web-based tool in your browser (guide included).
Prepare your photos with the free converter tool (included in the archive) for perfect framing.
Copy photos to the SD card and insert it into the frame.
Print and assemble the sleek case.
Plug in the power — your personal digital gallery is ready to shine!
Give your photos a second life! This project combines the joy of making, practical utility, and the warmth of memories into one rewarding build.