Babyphone Babysense HD S2 Stand 100mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A custom-designed stand for the Babysense HD S2 baby monitor camera.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
# Babysense HD S2 Stand / Mount Extension (100mm)
(Deutsche Beschreibung unten)
This is a custom-designed stand for the Babysense HD S2 baby monitor camera. It raises the camera by 100 mm (10 cm) to provide a significantly better viewing angle into the crib, especially when placed on a nearby dresser or shelf.
### Design
The stand features an elegant hourglass design. This shape is not only aesthetically pleasing but also functional:
* Wide Base (90 mm): Ensures maximum stability so the camera cannot be knocked over easily.
* Slim Waist (50 mm): Saves printing time and filament.
* Perfect Fit (75 mm Top): The top plate is designed to match the camera's base, featuring specific cutouts for the mounting pins and the central keyhole mechanism.
### Print Instructions
The model is optimized for FDM printing and requires NO supports.
* Material: PLA, PETG, or ABS (PLA is perfectly adequate).
* Infill: 5% to 8% Gyroid (Recommended for internal stability while keeping it light).
* Perimeters (Walls): 3 walls are recommended to make the "waist" strong and rigid.
* Supports: None. The geometry is designed with safe overhang angles.
* Seam Position: Set to "Aligned" or "Rear" for the cleanest look.
* Brim: Usually not necessary due to the large 90mm base, unless you have adhesion issues.
### Assembly
Simply place the Babysense HD S2 camera unit onto the top of the stand. The pins and the center peg will align with the holes at the bottom of the camera unit.
---
Designed with FreeCAD.
# Babysense HD S2 Standfuß / Erhöhung (100mm)
Dies ist ein passgenauer Standfuß für das Babysense HD S2 Babyphone. Der Halter hebt die Kamera um 100 mm (10 cm) an, um einen deutlich besseren Blickwinkel in das Kinderbett zu ermöglichen – ideal, wenn die Kamera auf einer Kommode oder einem Regal steht.
### Design
Der Standfuß ist in einer Sanduhr-Form (Hourglass) konstruiert. Das sieht modern aus und bietet technische Vorteile:
* Breite Basis (90 mm): Sorgt für maximale Standfestigkeit und verhindert Umkippen.
* Schlanke Taille (50 mm): Spart Druckzeit und Filament.
* Passform (75 mm Kopf): Die Oberseite ist exakt auf die Unterseite der Babysense HD S2 abgestimmt, inklusive Aussparungen für die Gummifüße/Pins und die zentrale Aufnahme.
### Druckempfehlungen
Das Modell ist für den FDM-Druck optimiert und benötigt KEINE Stützstrukturen (Supports).
* Material: PLA, PETG oder ABS (PLA ist völlig ausreichend).
* Infill: 5% bis 8% Gyroid (Bietet die beste Stabilität für den Deckel bei wenig Materialverbrauch).
* Wandlinien (Perimeter): 3 Wandlinien werden empfohlen, damit die schlanke Mitte stabil und grifffest ist.
* Supports: Keine nötig. Die Überhänge sind so konstruiert, dass jeder Drucker sie sauber drucken kann.
* Nahtposition (Z-Seam): Auf "Ausgerichtet" (Aligned) oder "Hinten" (Rear) stellen, damit die Naht nicht stört.
* Brim: Aufgrund der großen 90mm Basis meist nicht nötig, außer bei Haftungsproblemen.
### Verwendung
Die Kamera wird einfach auf den Turm gesetzt. Die Pins und der mittlere Zapfen greifen in die entsprechenden Öffnungen an der Unterseite der Kamera.
---
Designed mit FreeCAD.