Stream Deck XL Holder (1/4" Screw)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.88 – €3.53 net (excluding VAT)
For file: StreamDeckXLMount_0.4n_0.2mm_PETG_MK4S_2h8m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.20 excluding VAT (range midpoint).
- Weight reported by the author
- 67 g
- Print time reported by the author
- 2.13 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mount/holder for a Stream Deck XL for 1/4" screws.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 89
- Makes
- 0
- Views
- 417
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mount/holder for a Stream Deck XL for 1/4" screws.
The Stream Deck XL snaps into place via 12 5x2mm magnets, which can be inserted into the designated holes. It features 5 possible positions for mounting: top, bottom, left, right and back. For all required positions, threaded inserts (1/4", 12.7mm length) need to be inserted. The cable can pass through on both sides as well as the back.
Magents I used (strong enough to hold the Stream Deck as long as it is not upside down)
1/4" Threaded inserts I used
If you need any help, have a question or need a customized or printed and assembled version, feel free to contact me.