CoPrint CX-1 Extruder braket for Ender 3 V3 Plus with LED bar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These 2 brakets are for the E V3 Plus comaptibles with its on LED bar.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
These brackets allow the CX-1 extruders to be mounted on top of the Ender 3 v3 Plus while maintaining its rear LED bar and ensuring a solid mounting directly to the printer frame via the two rear M3 screw attachments.
I made two versions because CoPrint has released two versions of the CX-1 extruder mounts over time. One versions have vertical connections (the NEW version) and inclined connections (the OLD version).
Material required:
- 2 x 10 mm M3 screws (both versions, to secure the mount to the back of the printer frame)
- 6 x 35 mm M3 + 6 nuts and 6 washers (only NEW version)
- 5 x 65 mm Threaded rods + 10 nuts and 10 washers (only OLD version)
Optional material required:
-You may need a Dremel to cut the threaded rods to your desired size for the OLD version.
Assembly phases:
1) Remove the LED bar
2) Connect the CX-1 4-extruder attachment to the respective attachment (NEW and OLD)
3)Connetct the assembly with the 2 x 10 mm M3 screws to the back od the upper frame of the printer
4) Put the LED bar back on.
Plastic material and instruction:
- i've printed these brakets with eSun ASA+ with 2 mm layers height, 5 walls, 15% infill.
- You can print them even with ABS and PETG if you want. I don't recommend PLA because it's a bit fragile.
These Brakets are compatible with this carriage since it move the extruders back enough (I designed them specifically for this stl). This carriage give you back 300x300 mm printable area with the Chromahead installed for the Plus Ender and 220x220 for the non Plus Ender.
HEI! If you like this braket check my new Quick Swap version!
