M20 conduit mounting bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting of M20 electrical conduits for electrical installations and cable management.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Purpose
Mounting M20 cable protection conduits for electrical installations and cable management.
Prevents sagging and ensures a clean, parallel routing of cables.
Features
Clip mechanism: The conduit snaps into place and is held securely.
Cable‑tie slots: Integrated openings allow cable ties to be threaded through for additional fixation and to prevent lateral movement.
Screw mounting: Rear side includes a mounting hole for screws or wall plugs.
Robust geometry: Designed for FDM 3D printing with sufficient wall thickness for long‑term durability.
Space‑saving design: Holds conduits close to the surface, ideal for tight installation spaces.
Printing Recommendations
Material: PETG or ABS for increased temperature and chemical resistance; PLA is sufficient for dry indoor environments.
Infill: 20–40% depending on expected load.
Orientation: Print flat on the back side for maximum strength at the mounting point.
Supports: Usually not required; use minimal supports for overhangs if needed.
Applications
Home installations, workshop, garage
Mechanical and plant engineering
3D printing projects with structured cable routing