KR Thermal Detonator Switch Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a switch button spacer that I needed when I was installing my KR Thermal Detonator.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 13
- Makes
- 0
- Views
- 495
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
I needed a spacer to press on the top of my aux switch of my KR Thermal Detonator. There was nothing out there for this so I did some measuring and modeled a few sizes. There is 1mm,1.2,1.3,1.4,1.5&2mm. I wasn't sure exactly which one I would need. I tried multiple combinations with different tactile switches and I was able to come up with one combo that worked for me. This is a very simple design even a 1st grader could have came up with it ,but I thought that I would share it. It's basically a circle with a portion cut off of it so wires could be ran. The outside dimension of this is 7.57mm. I added photos of the sized that worked for me plus the kind of switch that worked for me. I printed these using the default settings of my Purse MK3S+ .15mm & 15% infill.