Side filament guide for Prusa MK3S
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.22 – €0.27 net (excluding VAT)
For file: Prusa filament guide_0.2mm_PLA_MK3S_18m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.24 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 17.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A filament guide for Prusa MK3S printers where you can put the spool next to the printer, and not on the top.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
A filament guide for Prusa MK3S printers where you can put the spool next to the printer, and not on the top.
It is an easy print, just use the gcode or the STL. Only requires a 625zz bearing and an M4 or M5 bolt. The M4 bolt threads in nicely, the M5 you have to drill the hole a little bit wider. The feet should fit nice and snug in the z top piece hex hole (tested also with the Bear mod).
0,2mm layer height
Prusament PLA
Stock 0,2mm speed setting in PrusaSlicer
Cheers!