Pop up irrigation sprinkler extension
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an extension for pop up sprinklers from Rain Bird, Hunter, K-Rain etc.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 51
- Makes
- 0
- Views
- 315
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this extension because the other ones I found couldn't fit the filter for my Rain Bird and Hunter MP rotator nozzles and I also found that the nozzles were quite hard to screw in so I designed my own. There's chamfers on both threaded parts to make it easier to screw in.
Let me know if you need any particular size.
v1.1: Updated to include an o-ring model which allows for the installation of an o-ring in the female connection. I've got quite a lot of pressure where I live and I noticed that there was some water leaking out from where the extension attaches to the original shaft. I also reduced the diameter of this female connection to make the connection more tight.
v1.2: Improved tolerances. Very little water is seeping out of the extension now but I'll continue to use the o-ring version for my own irrigation. You could probably print some TPU o-rings at 2.5mm thick for this if you want.
v1.3: Improved tolerances