Pop up irrigation sprinkler extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an extension for pop up sprinklers from Rain Bird, Hunter, K-Rain etc.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this extension because the other ones I found couldn't fit the filter for my Rain Bird and Hunter MP rotator nozzles and I also found that the nozzles were quite hard to screw in so I designed my own. There's chamfers on both threaded parts to make it easier to screw in.
Let me know if you need any particular size.
v1.1: Updated to include an o-ring model which allows for the installation of an o-ring in the female connection. I've got quite a lot of pressure where I live and I noticed that there was some water leaking out from where the extension attaches to the original shaft. I also reduced the diameter of this female connection to make the connection more tight.
v1.2: Improved tolerances. Very little water is seeping out of the extension now but I'll continue to use the o-ring version for my own irrigation. You could probably print some TPU o-rings at 2.5mm thick for this if you want.
v1.3: Improved tolerances