1 / 1
22mm Sink Filter Socket for 1/4" Ratchet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made a 22mm socket that fits on a 1/4" ratchet and locks onto it. Tested on a Parkside ratchet.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Printed on a P2S using PETG CF because this is what I had on hand.
Settings I used for the print:
Wall count - 3
Infill - 15% Gyroid
0.2mm Standard quality preset
Both the wall count and the Infill percentage can be increased if needed.