1 / 7
G&G SMC-9 Main Bolt Assembly (Part: GHJ-A04, A013, A015) — image 1
1 / 7

G&G SMC-9 Main Bolt Assembly (Part: GHJ-A04, A013, A015)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The main body of the SMC-9 bolt.

Rating
0 / 5
Likes
1
Downloads
14
Makes
0
Views
78
Reviews
0

Updated at source:

Model information

Category
Other Sports
License
Creative Commons — Attribution — Share Alike

This is a close 1:1 model of the G&G SMC-9 Bolt labelled (Part: GHJ-A04, A013, A015).

(Images showing only the rear being printed, but either side of the bolt will work with the OEM)

You will need the other parts that make up the whole assembly, including the ball bearing, spring and seals. Transfer all components and keep the stock recoil spring. 

This was tested using 80psi HPA, with all stock internals.

It ran well with slight deviations in the FPS, however, make sure the pin on the loading nozzle is secure, and any screws have loctite.

FEATURES

Higher ROF

Lower recoil 

Fast Semi responce

SETTINGS

Layer height: 0.12/0.2 with a 0.4mm nozzle

Infill: 15-20%

Walls: 4 

Inner wall flow: 0.5 (or 0.2 to current settings

Support: yes

The rest of printers settings such as support interface and speed and overhangs should be calibrated or would work with standard slicer settings.

I would recommend printing the shortened front bolt as I'm still working on reinforcing the bolt hold open arm so it does not snap in use. I will update soon.

If you have any questions, please leave a comment and I will get back to you.

Tags