Pop Ball DIY Casting Mold
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple print that lets you recreate the LEGENDARY pop ball toy +STEP file for remixing
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Supports
Unfortunately, since this model has an internal dome shape, it requires supports. i recommend using painted ones to make sure you only support needed areas and to ensure a good surface finish.
Materials
80a rubber resin and carbon black.
Casting
First, clamp the halves together with a vise, clamp, or even tape - just make sure that the halves are firmly stuck together.
Next, mix the carbon with the resin at a 3:2 mixture.
Using a syringe inject the rubber mix into the large hole of the mold until it comes out of the little hole.
Let it cure for at least 5 hours.
Removing from mold
Carefully remove the part from the mold making sure not to damage anything.